3D Curved Welded Mesh Fence for Defined Perimeters
3D curved welded mesh fence panels combine a welded steel grid with formed horizontal bends, creating a rigid, open-view boundary for garden and villa boundaries, schools, public spaces, farms, factory grounds and other perimeter projects. Configure the panel, post and fixing arrangement to suit the site layout and access-control requirements.
Panel Profile, Posts and Fixings
The supplied product information shows panels with two to four formed curves depending on panel height. Posts, clips, bolts and post caps can be coordinated with the panel system. Clip quantity varies with panel height; examples list two clips for a 1.0 m panel, three for panels around 1.2–1.5 m, and four for a 2.0 m panel. Confirm the fixing schedule against the selected post and panel design.
Available Dimensions and Mesh Options
Listed panel lengths are 2.0 m, 2.5 m and 3.0 m. Mesh openings include 50 × 150 mm, 50 × 200 mm, 55 × 100 mm and 55 × 200 mm. The dimensional source shows multiple heights from approximately 0.63 m to 2.03 m and several wire-diameter combinations. These are configurable references, not a single combined specification; confirm height, wire diameter, aperture, bend count and post spacing in the approved drawing.
| Specification | Options shown in supplied product information |
|---|---|
| Panel length | 2.0 m / 2.5 m / 3.0 m |
| Panel height | Approximately 0.63–2.03 m; confirm selected size |
| Mesh opening | 50 × 150 / 50 × 200 / 55 × 100 / 55 × 200 mm |
| Wire diameter | Multiple combinations shown, approximately 3.0–5.0 mm; confirm wire configuration |
| Formed bends | About 2–4, depending on panel height |
| Material | Low-carbon steel / metal |
| Surface finish | Zinc plated or galvanized; PVC and powder coating options require confirmation |
| Accessories | Posts, clips, bolts and post caps, subject to assembly configuration |
Steel and Surface Protection
The product information describes low-carbon steel wire with zinc plating or galvanizing and PVC coating options. Powder coating is also referenced in the coating illustration. Confirm the exact finish system and colour for the selected order; do not combine coating descriptions unless verified on the quotation and approved drawing.
Project Specification Checklist
- Fence line, application and required overall height
- Panel length, mesh opening and wire configuration
- Bend count, post type, section and spacing
- Clip, bolt and cap quantities
- Coating system, colour and order quantity
- Packing, destination and requested delivery schedule
Packing and Delivery
Source listing references plastic film and a metal tray, with a single-package reference of 12 × 150 × 30 cm and gross weight of 5 kg. Confirm bundle dimensions, weight and loading plan for the selected panel size and quantity. The listing cites 7 days for 1–100 pieces while larger quantities are pending; the current delivery schedule must be confirmed in the quotation.
Ordering and Minimum Quantity
The supplied screenshots show different minimum-order references, including 10 pieces and 500 metres. The applicable MOQ depends on panel configuration and supplier quotation. Share the panel height, length, finish, quantity and destination to confirm the final specification, packing and lead time.
